Not detect the CD in my CD-burning driver
by Sophi On April 15, 2009 | Utilities | Hits: 106
Software you need: Reaplayer
When you insert your cd, nothing happed or even occur some error message. In this case, you must read this passage.
This passage applies to:
- RealPlayer
When you insert a CD into your CD-burning drive, you may receive the message "Please insert a blank CD to begin" or "The inserted CD is not writable." These messages may occur if the CD media type is not writable and supported, if the CD is in the non-default CD-burning drive, or if auto-insert notification for your CD-burning drive is turned off in Windows or RealPlayer.
Solution 1: Check if you are using writable, supported CD media.
RealPlayer will not detect your CD if it does not recognize it as writable media. RealPlayer can burn only to writable media. RealPlayer may also not detect your CD if the disc is DVD media. RealPlayer does not support DVD media for burning purposes. This includes DVD-RAMs, DVD-Rs, DVD-RWs, DVD+Rs, and DVD+RWs.
Please remove the non-writable or unsupported CD, and replace it with a writable CD of a supported media type, either a CD-RW (rewritable compact disc) or a blank CD-R (recordable compact disc).
If you have a CD-RW or blank CD-R in your drive, but RealPlayer does not detect it as writable, the disc may be scratched, dirty, or damaged. Please replace the disc with a clean and non-damaged disc.
Solution 2: Change the default CD-burning drive.
RealPlayer cannot detect a writable CD if the drive is not the default CD burner drive. To make RealPlayer recognize the writable CD in this drive, change it to the default CD-burning drive:
1. Open RealPlayer.
2. On the Tools menu, click Preferences. The Preferences box opens.
3. In the Category pane, double-click CD, then click CD Burner.
4. Select the desired CD-burning drive in the Default Recordable Drive drop-down list, and click OK.
Solution 3: Make sure Windows auto-insert notification is turned on.
RealPlayer relies on Windows auto-insert notification to inform it that a disc has been inserted. If this notification option is not turned on, RealPlayer will not recognize a disc has been inserted. By default, this notification is turned on by Windows, but the installation of some software may prompt you to turn this feature off. To enable the auto-insert notification, choose the appropriate instructions for your computer operating system:
Windows XP Professional:
1. Click the Start button, then Run .
2. Type gpedit.msc and click OK .
3. Click the PLUS SIGN (+) next to Computer Configuration / Administrative Template / System.
4. Under Settings on the right side, double-click Turn Off Autoplay and then select Disable .
5. Click OK .
Windows 2000:
1. Click the Start button, then Run. Type regedit and click OK.
2. Click the PLUS SIGN (+) next to HKEY_LOCAL_MACHINE / SYSTEM / CurrentControlSet / Services.
3. Double-click Cdrom.
4. Under Name on the right side of the screen, double-click AutoRun.
5. In the Value Data field, type 1 to enable Auto Insert Notification.
6. Click OK.
Windows 98SE and Windows ME:
1. Click Start, then Settings, then Control Panel.
2. Double-click the System icon.
3. Click the Device Manager tab.
4. Click the PLUS SIGN (+) next to CD-ROM and double-click your CD-burning drive.
5. In the properties page, click the Settings tab and check Auto Insert Notification.
6. Click OK.
Solution 4: Make sure RealPlayer auto-insert notification is turned on.
To set RealPlayer to automatically detect CDs inserted into the CD drive:
1. On the RealPlayer Tools menu, click Preferences.
2. In the Category pane, double-click CD, and then click Advanced CD.
3. Click the Advanced Digital Options button.
4. Make sure Standard is selected in the Drive type section.
If your CD drive is not a standard IDE/ATAPI/SCSI drive, then click Other type and select the appropriate drive from the drop-down list. Click OK to close the Advanced Digital Options box.
Note: If you need information on the drive, contact your computer or CD drive manufacturer.
5. From the Category pane, click CD.
6. In the When Inserting a CD section, ensure that the Start Playback check box is selected.
7. Click OK to save changes.
Now do you know how to solve not detect the Cd in your CD-burning driver.
When you insert your cd, nothing happed or even occur some error message. In this case, you must read this passage.
This passage applies to:
- RealPlayer
When you insert a CD into your CD-burning drive, you may receive the message "Please insert a blank CD to begin" or "The inserted CD is not writable." These messages may occur if the CD media type is not writable and supported, if the CD is in the non-default CD-burning drive, or if auto-insert notification for your CD-burning drive is turned off in Windows or RealPlayer.
Solution 1: Check if you are using writable, supported CD media.
RealPlayer will not detect your CD if it does not recognize it as writable media. RealPlayer can burn only to writable media. RealPlayer may also not detect your CD if the disc is DVD media. RealPlayer does not support DVD media for burning purposes. This includes DVD-RAMs, DVD-Rs, DVD-RWs, DVD+Rs, and DVD+RWs.
Please remove the non-writable or unsupported CD, and replace it with a writable CD of a supported media type, either a CD-RW (rewritable compact disc) or a blank CD-R (recordable compact disc).
If you have a CD-RW or blank CD-R in your drive, but RealPlayer does not detect it as writable, the disc may be scratched, dirty, or damaged. Please replace the disc with a clean and non-damaged disc.
Solution 2: Change the default CD-burning drive.
RealPlayer cannot detect a writable CD if the drive is not the default CD burner drive. To make RealPlayer recognize the writable CD in this drive, change it to the default CD-burning drive:
1. Open RealPlayer.
2. On the Tools menu, click Preferences. The Preferences box opens.
3. In the Category pane, double-click CD, then click CD Burner.
4. Select the desired CD-burning drive in the Default Recordable Drive drop-down list, and click OK.
Solution 3: Make sure Windows auto-insert notification is turned on.
RealPlayer relies on Windows auto-insert notification to inform it that a disc has been inserted. If this notification option is not turned on, RealPlayer will not recognize a disc has been inserted. By default, this notification is turned on by Windows, but the installation of some software may prompt you to turn this feature off. To enable the auto-insert notification, choose the appropriate instructions for your computer operating system:
Windows XP Professional:
1. Click the Start button, then Run .
2. Type gpedit.msc and click OK .
3. Click the PLUS SIGN (+) next to Computer Configuration / Administrative Template / System.
4. Under Settings on the right side, double-click Turn Off Autoplay and then select Disable .
5. Click OK .
Windows 2000:
1. Click the Start button, then Run. Type regedit and click OK.
2. Click the PLUS SIGN (+) next to HKEY_LOCAL_MACHINE / SYSTEM / CurrentControlSet / Services.
3. Double-click Cdrom.
4. Under Name on the right side of the screen, double-click AutoRun.
5. In the Value Data field, type 1 to enable Auto Insert Notification.
6. Click OK.
Windows 98SE and Windows ME:
1. Click Start, then Settings, then Control Panel.
2. Double-click the System icon.
3. Click the Device Manager tab.
4. Click the PLUS SIGN (+) next to CD-ROM and double-click your CD-burning drive.
5. In the properties page, click the Settings tab and check Auto Insert Notification.
6. Click OK.
Solution 4: Make sure RealPlayer auto-insert notification is turned on.
To set RealPlayer to automatically detect CDs inserted into the CD drive:
1. On the RealPlayer Tools menu, click Preferences.
2. In the Category pane, double-click CD, and then click Advanced CD.
3. Click the Advanced Digital Options button.
4. Make sure Standard is selected in the Drive type section.
If your CD drive is not a standard IDE/ATAPI/SCSI drive, then click Other type and select the appropriate drive from the drop-down list. Click OK to close the Advanced Digital Options box.
Note: If you need information on the drive, contact your computer or CD drive manufacturer.
5. From the Category pane, click CD.
6. In the When Inserting a CD section, ensure that the Start Playback check box is selected.
7. Click OK to save changes.
Now do you know how to solve not detect the Cd in your CD-burning driver.
Related Articles
Top in All Articles More
Article Categories
Popular Searches More
Most popular searches among our users
Avira
computer boot up problems
computer won t boot up
delete browsing history hangs up in ie 8
How to convert MKV to WMV HD
how to recover windows when computer won t boot up
malware
MKV to WMV HD
MKV to WMV HD Converter
open pptx on linux
open pptx on mac
play mkv format files
pptx files
rebuild Rome Empire with Cradle of Rome
windows startup
© 2009 Softwarehowtos.com - All Rights Reserved Worldwide.